ZL30G Wheel Loader
Features of ZL30G Wheel Loader
Engine
1. YC6108G engine is equipped on Zl30G wheel loader.
2. PERKINS (China) 1006-6T Engine
3. It is in-line, vertical, water-cooled, direct-injection, and turbo-charged. (1006-6T)
4. Its four-stroke-cycle design provides long, effective power strokes and more efficient fuel combustion.
5. This high torque engine produces excellent carrying force to the wheel loader. Its operation efficiency is enhanced by adding pushing power.
6. This 1006-6T is one of the most energy-efficient engines among similar products.
7. It is of lower exhaust displacement, electric starting, and electric stopping.
All around Visibility
1. This wheel loader adopts a wide, tinted front window, allowing excellent vision to the operator.
2. The rear view mirrors provide good rear and side vision.
3. Wipers are also equipped on the windshield of the wheel loader.
Transmission
1. This construction equipment carries out 4 forward and 2 reverse speeds, straight gear constant mesh.
2. It adopts multi-gear power shift transmission. It is of parallel shaft (fixed shaft type) transfer structure.
3. 3-element torque converter with high torque ration is compatible with engine and transmission.
Smooth Control
1. It adopts pilot hydraulic controls, which are easy and quiet to operate.
2. Its wrist rest (Vinyl or leather) allows the pilot to operate the lever comfortably.
3. This wheel loader adopts full hydraulic steering, providing flexible operation to the pilot.
4. The seat is adjustable in dual directions.
Cab
1. The cab of this wheel loader is novel, unique and spacious.
2. The integrated cab is elaborately sealed so as to offer better sound insulation.
3. It comes with good shock deduction property.
4. Air-conditioner.
5. Tinted safety glass, safety front windshield.
6. FOPS and ROPS protection devices are put inside the frame structure of the cab.
Excellent Structure Convenient for Maintenance
1. It adopts unitary-folding hood. Controlled by the cylinder, the hood allows convenient maintenance to the engine and other parts of the wheel loader.
2. When the hood is opened, the engine system will be fully exposed.
3. The hood is made of compound material.
Axle
1. It adopts MERITOR Axle.
2. It has four driving wheels. The front axle is firmly fixed and the rear axle adopts oscillation structure.
3. The carrier assembly of this wheel loader adopts spiral bevel gear with single reduction. It produces low noise.
4. The wheel end reduction assembly is single planetary.
5. The axle shaft is of fully floating construction.
Side Door
1. The hood side door with a lock is made of non-metal materials. Oil and fuel refilling and other daily maintenance is convenient.
2. With avoiding-device, the opened side door is kept away from wheel contaminants.
Frame & Working Device
1. Quick coupler can serve as an optional attachment to the loader.
2. The structure goes through limited element analysis. The stress is evenly distributed to each part of the wheel loader and has a longer service life.
3. Each articulated position is equipped with dust proof, sealed material.
4. It is of center-point frame articulation. There is no recycling power waste and little tire wearing.
Specifications
Items Parameters Units
Rated Load 3000 kg
Raising time <6 s
Total cycling time <10 s
Max.drawing force 90 kN
Articulation angle 40(+or-)1
Min.turn radius <4800 mm
Grade ability 28
Wheel base 2700 mm
Track 1850 mm
Traveling speed 1st (F/R) 7.8/9.5 km/h
2nd (F/R) 13/28 km/h
3rd (F/R) 25 km/h
4th (F/R) 35 km/h
Engine Model YC 6105G-1640H
Rated power/rotation 85/2300 kw/r/min
Tires 17.5-25
Bucket capacity 1.7 m3
Dumping clearance 2800 mm
Dumping reach 1030 mm
Max.breakout force 110 KN
LxWxH 6830x2460x3170 mm
Hay grabber Min. grabbing diameter 1050 mm
Dumping clearance 2880 mm
Dumping reach 2100 mm
LxWxH 7460x2300x3170 mm
Overall weight 10.5 t
ZL50G Wheel Loader
Main Characteristics of ZL50G Wheel Loader
1. ZL50G wheel loader adopts fully hydraulic powered steering with flow-amplified system, pilot-operated controls.
2. It employs electric shift transmission, allowing convenient and flexible operation.
3. Center-point frame articulated.
4. This construction machine is of small turn radius, front and rear wheels track, good tire wear resistance and good cross-country capacity.
5. The integrated hood of this wheel loader is made of compound materials.
Specifications of ZL50G Wheel Loader
Items Unit Specifications
Bucket capacity m3 3.0
Rated load Kg 5000
Dumping clearance mm 3090
Dumping reach mm 1130
Raising time s < 6
Total cycling time s < 11
Max. drawing force kN 145
Max. breakout force kN 170
Articulation angle 35
Min. turn radius mm 6400
Climb ability 28
Wheel base mm 3300
Tread mm 2200
Traveling speed 1 st(F) km/h 11.5
1 st(R) km/h 16.5
2 nd(F) km/h 38
Engine Model CUMMINS 6CT8.3-C
Rated power kw 162
LxWxH mm 8110x3000x3460
Operating weight t 18
Tires 23.5-25
ZL60G Wheel Loader
Benefits of ZL60G Wheel Loader
1. ZL60G wheel loader adopts Cummins engine, which is featured by compact structure, stable performance and electrical starting. This ensures strong power system of the machine.
2. This construction machine is mounted with ZF transmission gear, which helps the driver to operate the machine easier and better.
3. KD-gear system is also equipped to reduce the time for frequent gear-shifting and improve efficiency.
4. Its pilot control system brings this wheel loader with rational flow distribution, easier operation and stable performance.
5. The optimized-designed functioning equipment offers rational arrangement for articulated joints, breakout force and raising power.
6. The dust-proof sleeve apparatus keeps dusts and sands away, prolonging the lubrication interval and service life of the wheel loader. The automatic leveling system also works to reduce the operator's fatigue and improve production.
7. It is equipped with electrically actuated engine hood, making it easier to maintain the engine.
8. The fully hydraulic wet-type service braking system has features like sensible response, stable and safer performance and free maintenance. It ensures safe machine operation of the wheel loader.
9. It is equipped with FOPS and ROPS cab, which is characterized by its wide vision, nice sealing and shock-absorbing, air conditioner and audio, providing a comfortable and safe working environment.
Specifications of ZL60G Wheel Loader
Items Parameters Units
Rated load 6000 kg
Raising time 6.5 s
Total cycling time 12 s
Max. drawing force 165 kN
Articulation angle 35
Min. turn radius 6495 mm
Climb ability 28
Wheel base 3400 mm
Track base 2200 mm
Traveling speed 1st (F/R) 6/6 km/h
2nd (F/R) 11/11 km/h
3rd (F/R) 23/23 km/h
4th (F/R) 36/36 km/h
Engine Model C6121ZG10P(CAT3306B)
Rated power/rotation 174/2200 kw/r/min
Tires 23.5-25-16PR
Bucket capacity 3.3 m3
Dumping clearance 3100 mm
Dumping reach 1250 mm
LxWxH 8593x3050x3435 mm
Max. breakout force 20.5 KN
Excavator
A excavator is a heavy equipment machine consisting of a boom (backhoe), a bucket and a cab on a rotating platform. It is also know as a digger or a 360-excavator. In the latest years, the applications of hydraulic excavator are expanded far beyond excavation tasks with buckets. For instance, hydraulic powered excavator attachments such as a breaker, a grapple or an auger can be attached to excavators for more applications other than excavation. As a result, the smaller excavator that is known as mini excavator or compact excavator is increasingly demanded in the market.
Applications
Excavators are used in many ways.
1. Digging of trenches, holes, foundations
2. Material handling
3. Brush cutting with hydraulic attachments
4. Forestry work
5. Demolition
6. General grading/landscaping
7. Heavy lift, e.g. lifting and placing of pipes
8. Mining, especially, but not only open，pit mining
9. River dredging
10. Driving piles, in conjunction with a Pile Driver
Specifications
924F Excavator
Operating Weight 24.1T
Bucket Capacity 1.1m3
Operating Weight 24.1T
Engine Model CUMMINS QSB6.7 (tire 3)
Type 6 cylinders, in line
Rated Power 142kw/2200rpm
Breath Turbo-charged, air cooled
Qty of cylinder 6
Cooling Water cooled
Air filter Dry air filter
Throttle Control Electric control
Fuel tank 360 L
Starter 24V/7.5KW
Main Equipment Main valve Kawasaki Japan
Main pump Kawasaki Japan
Hydraulic operating valve Kawasaki Japan
Traveling motor and Reducer TEIJIN, Japan
Cylinder Chinese
Hose Imported from Italy
Cabin Streamlined cabin, high-grade suspension seat
Air conditioner & Sound Cool and hot air conditioner, stereo sound.
Rollers & track domestic famous companies
Swing motor Kawasaki Japan
Working Scope stick length 3
Max. digging depth 7.04
Max. digging radius 10.25
Max. digging height 9.53
Max. dump height 6.7
Digging force of stick cylinder 95
Digging force of bucket cylinder 140
EC80, EC60, EC40 Hydraulic Excavator
EC80 EC60 EC40
Max. Digging dia 6375 6130 5810
Max. Digging reach 6224 5990 5702
Max. Digging height 7167 5660 5317
Max. Dumping 5100 3970 3697
Max. Digging depth 4140 3830 3598
Min. Swing radius 1815 2450 2385
Dimension (mm) EC80 EC60 EC40
Overall length 6155 5850 5455
Overall width 2220 1885 1650
Cab height 2618 2584 2440
Weight Ground clearance 786 694 578
Min. clearnce 392 369 350
Tail swing radius 1770 1650 1490
Wheel base 2119 1985 1721
Track shoe length 2752 2548 2198
Track shoe thick 2150 1880 1635
Track shoe height 710 639 532.5
Track shoe width 450 400 300
Blade (W/H) -- 1880/363 1650/300
Item unit EC80 EC60 EC40
Operating weight kg 7280 5650 4050
bucket capacity M3 0.34 0.2 0.14
LXWXH mm 6155/2220/2618 5900/1885/2584 5455/1650/2440
Engine Model -- Cummins B3.3 YANMAR 4TNV94L YANMAR 4TNV88-SYY
Rated power kW/ r/min 60/2200 39/2200 27.1/2200
Max. torque N.m 291 200 130
Displacement L 3.26 3.054 2.19
Fuel tank L 135 120 65
Hydraulic system Main pump 1 PZS and 1 gear pump 2 PZS and 1 gear pump 1 PZS and 1 gear pump
Rated flow L/min 1x198+21 2x55+35.6 1x110+11
Working press MPa 27.4 21.5 21
Hy. Oil pump L 60 85 70
specifications Swing speed r/min 12.0 9.0 14
Bucket digging force kN 53.6 42.5 23.2
Arm crowding force kN 39.2 28.6 19.3
Max. traction kN 56 50.5 33.9
Travel speed km/h 4.2/2.7 3.8/2.1 4.2/2.6
Ground clearance % 70 70 58
Ground pressure kPa 31 32.1 36.3
Backhoe Loader
WZ30-25 backhoe loader is an updated multi-functional construction machine that combines functions of a wheel loader and an excavator. It adopts four-wheel drive, power shifting transmission box with torque converter, full-hydraulic redirector, hydraulic pilot control, and can be widely used in applications like road maintenance, cropland constructing, pipeline paving, cable paving, gardening, road smashing, etc.
Features
1. WZ30-25 backhoe loader adopts Yuchai engine, which generates low noise, less emission, and great power.
2. It combines valve-control belt type braking system and parking brake, which ensures safer braking.
3. The operating apparatus are ergonomically designed. Steering wheel, meter panel, joysticks, seats, and more equipment can be adjusted freely at will.
4. The rear axle of this backhoe loader can be swayed upward or downward so as to ensure the good trafficability and cross-country performance.
5. It is of optimized loading equipment design. The joint points are reasonably distributed. The running positions come with limit function, which could effectively avoid material spilling. The unloading position has automatic flat-laying-function. These designs can effectively decrease labor intensity and improve the working efficiency.
6. It has unique centered excavating device and wing-type outrigger and has better stability when it is used for rocks crashing or deep excavation.
7. This backhoe loader takes the lead in adopting hydraulic proportional pilot control, which is of easy operation and fast positioning.
8. Its luxurious cab is comfortably designed. It is characterized by its wide vision, nice sealing and shock-absorbing performance. Optional air conditioner is available.
9. Over 10 attachments, like hydraulic breaking hammer, vibratory plate compactor, clamps, are available with this backhoe loader for more functions.
Specifications of WZ30-25 Backhoe Loader
Bucket Capacity 1.0m3
Digger capacity 0.3m3
Dumping Height 2700mm
Dumping reach 950mm
Steering angle (+or-)35
Steering angle of digging device (+or-)85
Engine Yuchai
Model YC4108
Type Four-stroke, water cool, straight engine
Rated power 65kw
Rated rotate speed 2500r/min
Wheel base 2600mm
Track 1700mm
Tire 16/70-24
Max. digging depth 4400mm
Max. digging radius 5471Mm
Outer dimension 8000x2200x3350mm
Overall weight 9500kg
SD7 Bulldozer
SD7 bulldozer is a track type dozer with elevated sprocket, hydraulic direct drive, semi-rigid suspended and hydraulic controls. Attachments like straight tilting blade, angle blade, coal pushing blade, single shank ripper, three shanks ripper, are compatible with this 230 horse power dozer. It has an ROPS and air-conditioned cab. With features like new structure, good performance, high working efficiency, safe and comfortable operating condition, this bulldozer is your wise choice!
Main Specifications
Operating weight (not including ripper) 23800k
Ripper weight 3900 k
Ground pressure (without ripper) 71.9kPa
Track center distance 1980mm
Grade ability Latitude30 Transverse 25
Ground clearance 404mm
Overall dimensions (LxWxH) 5677x3500x3402 (with straight tilting blade)
Specifications of Diesel Engine
Model A NT855-C280 (Cummins)
Rated speed 2100 RPM
Flywheel power (speed at 2100 rpm) 169 kW
Min. Fuel Consumption <=235 (g/Kw.h)
Model B C6121ZLG10 (Shanghai )
Rated speed 2100 RPM
Flywheel power (speed at 2100 rpm) 169 kW
Min. Fuel Consumption <=222 (g/Kw.h)
Theory travel speed (km/h)
1st gear forward 0-3.9 1st gear backward 0-4.8
2nd gear forward 0-6.5 2nd gear backward 0-8.2
3rd gear forward 0-10.9 3rd gear backward 0-13.2
Dozing operation rate (moving distance 40m) 350m3/h
Torque Converter
The torque converter applied in this SD7 bulldozer is of power separating hydraulic-mechanic type.
Transmission Assembly
The transmission assembly of this bulldozer integrates center drive, transmission and speed control valve in one. It can be assembled or disassembled conveniently. The transmission adopts multi-stage planetary gear drive to realize modular assembling and disassembling. Through the multi-functional control valve, the shift can be changed among 1st gear, 2nd gear, 3rd gear forward or reverse rapidly.
Steering and Braking Clutch
1. The steering clutch and braking clutch adopted in this bulldozer are adjustment-free, oil-type and multi-disc clutches.
2. The braking clutch is of spring-pressed, hydraulic separated, constant meshed type. The steering clutch is of hydraulic pressed, non-constant type.
3. While the steering and the braking clutches are operated at the same time, slow steering, sharp steering and braking can be realized.
4. The braking of the entire bulldozer can be achieved through the pedal.
5. Parking braking rod works to keep the undercarriage system in braking condition while the engine is started. It guarantees the machine not to slip on slopes when the engine is started.
Final Drive
This bull dozer adopts two-stage planetary reduction gear mechanism as its final drive. It is mounted outside of the steering and braking clutch. The combined sprocket segment can be conveniently assembled or disassembled for maintenance.
Hydraulic System
The hydraulic system of SD7 bulldozer is made up of oil pump, transmission control valve, steering and braking control valve, sequence valve, relief valve at torque converter outlet, filter and lines.
Main pump Gear pump
Oil flow 160 L/min
Working pressure 3.1 MPa
ROPS Cab with Air Conditioner
1. The cab is of hexagonal, thin-wall, box-type structure.
2. Glasses are mounted at six sides, which provides broad view to the driver.
3. Pulling and pushing glass is installed at the back side.
4. An air conditioner is mounted at the top. It works to either cool or heat the cab.
5. The structure of Rop is rigid, which protects the driver efficiently when the bulldozer is in special condition.
Implement Hydraulic System
Mainly consists of oil pump, cylinder, inlet valve group diverter valve group, oil tank line and controlling parts, implement hydraulic system functions to control the lifting, lowing and tilting of the blade. It can also be used to control the lifting, lowing of the ripper.
Main pump High pressure gear pump
Oil flow 194 L/min
System working pressure 18.6 MPa
Left and Right Undercarriage System
1. The track is of triangle shape and elevated sprocket.
2. There are two idlers in the front and at the rear of the frame and seven track rollers.
3. Recoil spring and cylinder adjuster are mounted at the undercarriage.
4. The rear end of undercarriage frame is supported on the pivot.
5. The front end is articulated with the equalizer bar.
6. Different undercarriage systems are available for different implements.
7. The center gravity of the bulldozer can be adjusted at the best position.
8. Different width of track shoe can be chosen so as to ensure the optimum traction efficiency of this bulldozer.
Maintenance Filling Capacity
Fuel tank 450L
Water tank of cooling system 118L
Camshaft box of the engine 20L
Bevel gear case 150L
Implement oil tank 100L
Pivot lubricating tank 15L
Final drive 15L
Optional Implement and Components
1. Cab
Rops with air conditioner cab (standard configuration), Rops cab or Rops canopy
2. Front mounted implement
Straight tilting blade (standard), angle blade, or U-type blade
3. Rear mounted implement
Single shank ripper (standard), three shanks ripper, or back drawing mechanism
4. Track shoe of undercarriage, optional track shoe width
510mm, 560mm (standard), 660mm, or 914mm
5. Winch dozer for forest application, desert dozer, LGP dozer, and HW dozer are available upon request.
SD8 Bulldozer
SD8 bulldozer is a track type bulldozer with elevated sprocket. It is of elastic suspended undercarriage system, hydraulic direct drive and hydraulic controls. It could be equipped with S-blade and single shank ripper. With high strength plate main structure, it carries out stable performance in stony and other bad earth conditions. This bulldozer is equipped with ROPS device and comfortable seat.
Main Specifications
Operating weight (not including ripper) 40000 k
Ripper weight 4300 k
Engine flywheel power/RPM 246 kw (335HP)/1900r/min
Track ground contact length 3280 mm
Ground pressure (without ripper) 105 kPa
Track contact length 2200 mm
Overall dimensions (LxWxH) 8090x4172x3952 mm (with single shank ripper)
Grade ability latitude30 transverse 25
Ground clearance 485mm
Theory travel speed (km/h)
1st gear forward 0-3.9 1st gear backward 0-4.8
2nd gear forward 0-6.8 2nd gear backward 0-8.4
3rd gear forward 0-11.9 3rd gear backward 0-14.8
Dozing operating rate (moving distance 40m) 452m3/h
Specifications of Diesel Engine
Model NTA855-C400 (BCIII)
Type water cooled, single line, four strokes, turbocharged, 6-cylinders, diameter 140mm
Rated speed 1900 r/min
Flywheel power 246kw (335HP)
Torque storage coefficient 24.5%
Start mode 24v electric starting
Torque Converter
Power separating, hydraulic-mechanic drive, single stage torque converter is used in SD8 elevated sprocket bulldozer.
Transmission Assembly
The transmission assembly integrates center drive, transmission and speed changing control valve into one component. This allows them to be conveniently assembled or disassembly easily as a part. The transmission adopts multi-stage planetary drive to realize modular assembling and dissembling. Through the multi-functional control valve, the speed can be shifted rapidly among 1st gear, 2nd gear, and 3rd gear forward or reverse gear.
Steering and Braking Clutch
1. This bulldozer adopts adjustment-free, oil-type and multi-disc clutches for the steering and braking clutch.
2. The braking clutch is of spring-pressed, hydraulic separated, constant meshed type. The steering clutch is of hydraulic pressed, non-constant type.
3. Slow steering, sharp steering and braking can be carried out when the steering and the braking clutches are operated at the same time.
4. Through the pedal, the entire bulldozer can be braked.
5. Parking braking rod maintains the undercarriage system in braking condition while the engine is started. It prevents the bulldozer from slipping on slopes when the engine is started.
Final drive
The final drive adopted in this bulldozer is a two-stage planetary reduction gear mechanism. It is mounted at the outside of steering and braking clutch. Combined sprocket segment is very convenient for assembling, disassembling and service.
Undercarriage System
SD8 dozer utilizes elastic-mounted undercarriage system, which is of triangle-shape track and elevated sprocket. Through the floating function of continuous auxiliary suspension device, the machine can travel adjacent to obstacle on the ground. It greatly improves the traveling and traction performance of the machine and comfort of the driver.
ROPS Cab
1. The cab is of hexagonal, thin-wall, box-type structure. Glass is mounted at six sides, which provides wide viewing range to the driver.
2. Pulling and pushing glass is mounted at back side.
3. Air conditioner can be installed upon request.
4. It can The rigid ROPS structure protect the driver efficiently when the bulldozer is in special condition.
5. The operator's seat could be tilted 15° to the right. With tiltable fuel tanks, engine hood and tracks, the driver can have a broad front and rear sight.
Implement Hydraulic System
Implement hydraulic system of this bulldozer is in charge of the lifting, lowering and tilting of the blade. It also can control ripper. It mainly consists of oil pump, cylinder, valve group, oil tank line and controlling parts. Implement pump adopts two group vane pump, with the specifications as follows.
Front pump Displacement 129 ml/r
Rated pressure 21 MPa
Rated speed 2000 r/min
Rear pump Displacement 56 ml/r
Rated pressure 21 MPa
Rated speed 2000 r/min
Rated operation pressure of blade lifting system 17.5 MPa
Rated operation pressure of tilting system 18.3 MPa
Hydraulic System of Tractor
It consists of oil pump, transmission control valve, steering and braking control valve, sequence valve, torque converter outlet relief valve, filler and oil line, etc. It adopts three group gear pump as the main pump. The main performance is as follows.
Lubricating pump Rated displacement 90 ml/r
Rated pressure 0.4 MPa
Rated speed 2000 r/min
Working pump Rated displacement 115 ml/r
Rated pressure 3.1 MPa
Rated speed 2000 r/min
Oil draining pump Rated displacement 160 m/r
Rated pressure 0.5 MPa
Rated speed 2000 r/min
Maintenance Filling Capacity
Fuel tank 753L
Water tank and diesel engine cooling water 125L
Camshaft case of diesel engine 47L
Bevel gear case hydraulic system of tractor 167L
Final drive (one side) 23L
Rear seat buffer spring case (each side) 30L
Pivot lubricating 13L
Implement system oil tank 89L
Blade
Type Height Width Capacity
s-blade 1765mm 4172 mm 13.0 m3
Ripper
Type single, adjustable hydraulic ripper
Rippering angle 45
Max. Penetration 1150mm
Max. Lifting height 830mm
Blade type Ground contact length (A) Overall Length (B) Blade height (C) Overall height (D) Blade width (E) Track center distance (F) Penetrating length Lifting height Blade capacity
Straight tilting blade (s-blade) (with ripper) 3280 8090 1765 3952 4172
2200 614 1288 13.0
Straight tilting blade (S-blade) (with traction mechanism) 3280 6755 1765 3952 4172 2200 614 1288 13.0
Diesel Forklift Truck
Specifications of Diesel Forklift Truck
LOAD CAPACITY 4000 kg
LIFTING HEIGHT 3000mm
TOTAL WEIGHT 4900 kg
OVERALL DIMENSIONS 4100x1228x2110 mm
FORK LENGTH 1200 mm
FORK WIDTH 150 mm
FORK THICKNESS 45 mm
ENGINE MODEL 498BPG (Made in CHINA)
POWER 45KW
POWER SHIFT With tor-con
PACKING DETAILS 1 pcs/20'Container 4 pcs/40'Container
Electric Forklift Truck
Electric forklift truck is powered by electric motor. It adopts storage battery as its power source. Electric forklift truck generates little noise and no pollution. As a result, it is widely used in pharmaceutical, medical and other industries. Since a battery could last about 8 hours, standby batteries are necessary if an electric forklift truck is required to work more than 8 hours in a row. At the present time, the most popular battery powered forklifts in the electric forklift truck markets are 3-wheel electric forklift truck, 4-way narrow aisle electric forklift truck, 4-wheel electric forklift truck, automated guided electric forklift truck (AGV), etc.
Specifications of Electric Forklift Truck
LOAD CAPACITY 3000 KGS
LIFTING HEIGHT 3000 MM
LOAD CENTER 500MM
TOTAL WEIGHT 4900 KGS
OVERALL DIMENSIONS 2790x1225x2200 MM
POWER TYPE BATTERY
MAX.TRAVELSPEEDS 14km/h
MIN.TURNING RADIUS 2350MM
FRONT TYRE 28x9-15
REAR TYRE 18x7-8
TRACTION MOTOR XQ-10-1C
LIFTING MOTOR XQD-13-3S
BATTERY MODEL D-500 (MADE IN CHINA)
BATTERY VOLTAGE/CAPACITY 80/500 V/Ah
PACKING DETAILS 2 pcs/20'Container; 4 pcs/40'Container
Gas and Oil Forklift Truck
Gas and oil forklift truck is powered by LPG or gasoline. It is usually used in outdoor applications where there is no special requirement for emission and noise. LPG and gasoline powered forklift is characterized by convenient fuel refilling, making it suitable for long-term continuous operations. A gas and oil forklift truck could also work in bad working conditions like rainy days.
CPQD30F Gas and Oil Forklift Truck
LOAD CAPACITY 3000 kg
LIFTING HEIGHT 3000 mm
TOTAL WEIGHT 4320 kg
OVERALL DIMENSIONS 3790x1228x2110 mm
FORK LENGTH 1200 mm
FORK WIDTH 125 mm
FORK THICKNESS 45 mm
ENGINE MODEL MITSUBISHI 4G64-31ZG (made in Japan)
POWER 38KW
POWER SHIFT TOR-CON
PACKING DETAILS 2 pcs/20'Container; 4 pcs/40'Container
LSD212H Single Drum Road Roller
Specifications of LSD212H Single Drum Road Roller
Model LSD212H
Operating mass 12000kg
Static Linear Load 303N/cm
Vibration Amplitude 1.8/0.9mm
Vibration Frequency 30/36Hz
Centrifugal force 270/180KN
Max. travel speed 10km/h
Grade ability 40%
Turning Radius 6500Mm
Drum Width 2100mm
Wheelbase 3050mm
Ground Clearance 472mm
Diesel Model Cummins 6BT5.9
Diesel Power 110KW
Overall Dimensions 6000x2250x2950mm
XS100 XS120 Single Drum Road Roller
Specifications of XS100 XS120 Single Drum Road Roller
Type XS100 XS120
Working mass 10600kg 12400kg
Distribution mass on front drum 5400kg 7200kg
Distribution mass on rear drum 5200kg 5200kg
Static Linear Load 250N/cm 355N/cm
Driving speed 0-12km/h 0-12km/h
Grade ability 55% 47%
Min. Outer turning radius 5900mm 5900mm
Min. Clearance 460mm 460mm
Max. Shell protuberating 130mm 130mm
Steering angle (+or-)35 (+or-)35
Swinging angle (+or-)9 (+or-)9
Vibration Frequency (Low/High) 30/35Hz 30/35Hz
Nominal amplitude Low/High Frequency 1.80/0.71mm 1.80/0.9mm
Excitation force Low frequency high amplitude/ High frequency low amplitude 210/110kN 280/190kN
Vibrating drum dia. 1523mm 1523mm
Vibrating Drum Width 2130mm 2130mm
Engine
Model B3.9-C B3.9-C
Type Water cooling, pressurized, inter cooling
Rated Power 2500r/min 97kW 97kW
Total length 5765mm 5765mm
Total width 2350mm 5765mm
Total height 3240mm 3240mm
LDD214H Double Drum Road Rollers
Operating mass 14000kg
Static Linear Load 329N/cm
Vibration Amplitude 0.74/0.35mm
Vibration Frequency 40/50Hz
Centrifugal force 175x2/x112
Max. travel speed 13km/h
Gradeability 40%
Turning Radius 7000Mm
Drum Width 2130mm
Drum diameter 1300mm
Wheelbase 3510mm
Ground Clearance 350mm
Diesel Model Cummins6BT5.9
Diesel Power 110KW
Overall Dimensions 4810x2274x3120
XP261 Pneumatic Road Roller
Min. Working mass 14500kg
Max. Working mass 26000kg
Static Linear Load 292/287
Working Speed 0-20km/h
Grade ability 20%
Min. Turning radius 9000mm
Min. Clearance 290mm
Wheel base 4000mm
Swinging distance of front tyre( +or-)45mm
Number of tyre 5 front tyres & 6 rear tyres
Tyre specification Smooth 11.00-20
Compacting width 2750mm
Engine Model D6114ZG10B
Rated rotating speed 2000R/min
Rated power 115kw
Contour size 5060x2845x3480mm
YL16G Pneumatic Road Roller
YL16G
Max. operating mass 16000kg
Min. operating mass 9000kg
Max. travel speed 15km/h
Tire number 4+5
Tire contact pressure 150-300kpa
Grade ability 20%
Turning radius 7500Mm
Rolling width 2290mm
Diesel model Cummins 4BT3.9
Diesel speed 75KW
Overall dimensions 4770x2290x3162mm
Motor Grader
Motor Grader
A motor grader is a construction machine that uses a long blade to create a flat surface. Typical road grader has three axles. The engine and the cab of the grader are situated above the rear axles at one end of the machine. A third axle is equipped at the front end of the vehicle and the blade is situated in between. A motor grader is usually used for constructing and maintaining dirt roads and gravel roads. In paved road constructions, it could be used for preparing the base course by creating a wide flat surface where the asphalt can be placed on. A motor grader could also set soil foundation pads before the construction of large buildings.
Our GR215C motor grader is ideal construction machinery for the construction of national defense projects, mining construction, urban and rural road, water conservancy construction and farmland reconstruction.
Characteristics
1. GR215 motor grader is of novel appearance design.
2. It is of articulated frame.
3. It has small turning radius, ensuring good motility of the motor grader.
4. This grader adopts hydraulic controlled power shift gearbox. It offers 6 ahead gears speeds and 3 back gears.
5. The blade is fully hydraulic controlled.
6. It adopts 3 section driving axle for the rear axle, which is provided with the NO-SPIN self-locking differential mechanism.
7. Universal hydraulic parts are adopted.
8. The manipulation table and seats are adjustable for more comfortable operation.
9. The cab is grand and nice to look at. It is well sealed and provides broad vision to the driver.
10. Optional front bulldozing plate, rear scarification device, front scarification harrow and automatic leveling device are also available
Specifications of GR215C Motor Grader
Basic specification
Appellation Parameter
Engine model QSB6.7 Euro III
Rated power/speed 164kW(220hp)/2200rpm
Dimension (L*W*H) (standard) 8970x2625x3300
Operating weight(standard) 16500kg
Tire size 17.5-25RP12
Min. ground clearance 430mm
Distance between front and rear axles 6266mm
Distance between middle and rear wheels 1639mm
Operating specification
Max. steering angle of front wheel (+or-)45
Max. lean angle of front wheel (+or-)17
Max. oscillation angle of front axle (+or-)15
Frame articulation angle (+or-)25
Min. turning radius using articulation 7.3mm
Blade maximum lift above ground 460mm
maximum depth of cutting 500mm
maximum blade position angle 90
blade cutting angle 28-70
circle reversing rotation 360
moldboard width*height 4270x610mm
Performance specification
Traveling speed, forward 5, 8, 11, 19, 23, 38km/h
Traveling speed, reverse 5, 11, 23km/h
Max. tractive, reverse 87kN
Max. grade ability 20
Tire inflation pressure 2.6bar
Working hydraulic pressure 18 Mpa
Transmission pressure 1.6-1.8 Mpa
Paver
Paver
A paver is a construction machine for laying asphalt on roadways. A paver finisher is usually fed by a dump truck. RP951A multi-function asphalt concrete paver offered by Shanglong International is a kind of engineering vehicle used for paving materials on the base and the surface of highways. This asphalt finisher combines the many benefits of similar products and is of numerical control system, ultrasonic sensor, electrical auto-leveling system, self-diagnosis function, dual-tamper and vibration, resulting in good paving stability, uniform material flow, high-density pre-compaction, and even surface. It is an ideal tool for paving base materials, asphalt, and concrete materials.
Features of RP951A Multi-function Asphalt Concrete Paver
1. This asphalt concrete paver is of separate driving system for the right and left tracks and automatic-computer-control system, ensuring the constant paving speed.
2. It adopts four sets of separate full hydraulic transmission for the conveyor-auger system on both the left and right sides. Its ultrasonic sensor controls the material lever.
3. The material augers can move up and down easily, making it possible to adapt different paving thickness and reduce material segregation.
4. This multi-function asphalt concrete paver adopts auto-leveling technology for the leveling system.
5. The screed adopts dual tamper bars, eccentric vibrators and electric-heating system for high pre-compacted density.
6. This asphalt paver is powered by DEUTZ BF6M1013E diesel engine.
7. Its large-scale crawler belt allows this machine to work reliably on even the worst road surfaces.
8. Its conveyor bottom plate, distributing augers and screed bottom plated are made of imported wearing-resistant steel plates, which has a prolonged service life.
9. All the working parameters are directly and clearly indicated on the control panel, which could be mounted either on the right or the left side.
10. Optional mobile auto-leveling reference beam is available with this multi-function asphalt concrete paver.
Parameters of RP951A Multi-function Asphalt Concrete Paver
RP951A Multi-function asphalt concrete paver
Standard Optional
Engine model BF6M1013E -
Rated engine output kw 137 -
Rated engine rotation speed r/min 2300 -
Engine manufacturer Germany Deutz -
Basic working width m 3.0 -
Max. working width m 9.5 -
Max. working thickness mm 350 -
Paving speed m/min 0-18 -
Traveling speed km/h 0-2.4 (0-40m/min) -
Theoretic productivity t/h 700 -
Hopper capacity t 14 -
Smoothness mm/3m 3 -
Slope leveling tolerance % (+or-)0.02 -
Feeding speed m/min 0-24 -
Material auger rotation speed r/min 0-90 -
Basic diameter of material auger mm 420 -
Screed DTV-I Double-tamper vibrators electric-heater 575 Hydraulic extension electric-heater
Extend style Fixed extension Hydraulic extension
Rotation speed of tamper bar r/min 0-1470 0-1500
Amplitude of tamper bar mm Main: 3, 5, 7, 9 Aux.:0, 3, 6, 9, 12 4, 8
Vibration frequency HZ 0-50 68-71
Heating output of the screed kw 28 -
Basic voltage of electro-hydraulic system V 24 -
Battery capacity VAhx2 165 -
Grounding length of the crawler belt mm 3218 -
Width of crawler belt mm 300 -
Min. turning radius mm Pivot steering -
Grade ability % 20 -
Fuel tank capacity l 270 -
Hydraulic tank capacity l 400 -
Conveying weight of the main machine t 21.3 -
Gross weight kg 28.7 -
Conveying dimension mm 6759X3000X3850 -
Outline dimension mm 6759X3000X3850 –
Asphalt Road Milling Machine
Asphalt Road Milling Machine
XM130 asphalt road milling machine is an asphalt concrete road maintenance machine applied for renovating asphalt pavement on large-scale highways, urban roads, airports, freight yard, etc. It could also be used for thorough removal of entire concrete overlay, and cleaning protuberance, oil layers, reticulation and vehicle tracks. In addition, road trench and tunnel excavation, cement road surface roughening and dislocation smoothening could also be carried out by this asphalt road milling machine. With features like high efficiency, simple operation, easy control of milling depth, waste material recycling, and good maneuverability, XM130 asphalt road milling machine is an ideal construction machine for pavement maintenance and renovation.
Characteristics of XM130 Asphalt Road Milling Machine
Structure
XM130 cold milling machine adopts the structure of front axle driving and mechanical driving mill drum.
Travel System
This asphalt road milling machine adopts stepless shift for the hydraulic and mechanical drive system. The high speed and low speed can satisfy different request of devolving and milling.
Power Transmission
Power transit from pump, motor, reduction gear, and driving axle.
Appending System
Freely float front-wheel, independently support rear-wheel. Right rear-wheel can swing inward that is easy to mill the brim.
Milling System
Mechanical drive mode, high efficiency, import milling cutting of long using life are all available with this asphalt road milling machine.
The driving route is from engine, to stretch shaft coupling, clutch, transmission, chain wheel box and milling drum.
Controlling System of Milling Depth
The control of milling depth of this asphalt road milling machine is achieved by adjusting the height of left or right support legs. The assignment ruler on the back supporting leg displays the milling depth. Automatic leveling unit can be installed to this system.
Turning System
It adopts hydraulic turning system and has flexible operation.
Cooling System
This machine is equipped with a fan-shaped muzzle, which jet water to the milling cutting, cooling the milling cutter and lessening the dust. The bulky water-box allows it to work incessantly. Electric water pump, high-pressure insufflation, take-down and clear the muzzle easily.
Brake
The brake system of this asphalt road milling machine consists of traveling brake and parking brake.
Lighting System
It is equipped with illumination lamp for nightwork.
Steering Pedestal and Instrument Board
The position of the chair can be adjusted back and forth so that the operator can step freely on the roomy maneuvering platform. It is comfortable to manipulate the instrument and the control handle.
Transportation Security
XM130 asphalt road milling machine has several pick-up points that have function of crane or convey.
Technique Training
Operator training that lasts about 2 weeks is available on the scene or on the factory. The trainings include operating, debugging, maintenance, hydraulic theory, electric theory, structure introduce, construction method, safety precautions and so on.
Top Specifications of XM130 Asphalt Road Milling Machine
Engine
Model Item XM130
Manufacturer Shanghai Diesel Engine Co., Ltd.
Type C6121ZLG
Cooling mode Water-cooling
Cylinder quantity 6
Rated power 190kw/255hp
Rated speed 2200rpm
Oil-consuming <=255g/kwh
Noises <=90dB(A)
Milled depth and width Milled depth 0~315mm
Milled width 1320 mm
Max. travel speed 0~7 km/h
Max. milled travel speed 33m/min
Min. turning radius(mm) 7000 mm
Milled drum tools 112
Drum diameter 980 m
Travel mode 4x2
Twill mode Roughening and dislocation smoothness
Measurement
XM130 length x width x height
Machine 5255x2480x3245 (mm)
Conveyor 7020x1030x1040 (mm)
Top XM130 Technical Specifications
Specification Item XM130
Max. milled width 1320 mm
Max. milled depth 315 mm
Milled drum tools 112
Engine type C6121
Rated power 190kw/255hp
Rated speed 2200rpm
Oil-consuming <=255g/kwh
Operating speed 0~33m/min
Travel speed 0~7km/h
Max. gradeability >=20%
Min. ground clearance 320mm
Min. turning radium 7m
Operation weight 20000kg
Fuel tank 280 (l)
Hydraulic oil tank 160 (l)
Water tank 7850 (l)
Electric system 24V
Machine (length xwidth xheight 5255x2480x3245 (mm)
Conveyor (length xwidth xheight) 7020x1030x1040 (mm)
Top XM130 Standard Configuration
No Name Manufacturer
1 Engine Shanghai Diesel Engine
2 Hydraulic system SAUER
3 Transmission system Stretch shaft coupling CENTA
Transmission Hangzhou Advance Gearbox Co., Ltd. or Xi'an Heavy Machinery Research Institute
Chain wheel box Xuzhou Road Construction Machinery Co. Ltd.
4 Milling cutter KENNAMETAL
5 Travel systems Working box Hangzhou Advance Gearbox Co., Ltd. or Xi'an Heavy Machinery Research Institute
Drive axle Xuzhou Meriter Axle Co., Ltd.
6 Tyres EUERPADS Co., Ltd.
7 Conveyor EUERPADS Co., Ltd.
Horizontal Directional Drill
XZ280 horizontal directional drill is mainly applied to non-excavation ground for laying and changing different pipeline. Generally characterized by its high efficiency, comfortable operation and internationalized fittings, it is an ideal construction equipment for applications in water supplying, gas, electrical, telecommunication, central heating, and petroleum industries.
Performance and Characteristics
1. Several top control technologies like PLC control, electro-hydraulic proportion control, load sensitive control and adopted in this horizontal directional drill.
2. It has drilling rod automatic disassembly and assembly device, which can improve the working efficiency, decrease the labor required and manual error operation and thus, reduce the construction cost.
3. The descending and ascending of the automatic anchor is controlled by the hydraulic system. The anchor is great in force and is easy and convenient to operate.
4. The dual-speed power head runs with low speed during drilling and dragging for smooth construction. It could also speed up to slide with 2 times of speed to reduce the auxiliary time when returning and disassembling the drilling rod with empty loads.
5. The engine of this horizontal directional drill has turbine torque increment characteristics, which can instantly increase the power when it comes across with complex underground conditions.
6. The power head is of high rotation speed, good boring effect and high construction efficiency.
7. XZ280 horizontal directional drill is of single lever operation. Functions like thrust, pullback, rotary and more can be carried out conveniently with the single lever.
8. With one single operator, the rope controller can carry out disassembly and assembly of vehicle. It is safe and highly efficient.
9. Patented floating vice are applied in this horizontal directional drill. Its can effectively prolong the service life of the drilling rod.
10. The engine, hydraulic parameter monitoring alarm and other safety protection functions are available to protect the safety of the operator and the horizontal directional drill.
Main Technical Specification
Model XZ160A XZ280 XZ320
Engine Shangchai Shangchai Shangchai
Rated power 100kW 140kW 140kW
Max. pullback/thrusting 160/100kN 280/280kN 320(400)/200kN
Spindle torque (max) 5000N.m 10000N.m 12000N.m
Spindle speed 0-180r/min 0-120r/min 0-140r/min
Backreaming diameter Φ600mm Φ750mm Φ800mm
Tubing length (single) 3m 3m 3m
Tubing diameter Φ60mm Φ73mm Φ73mm
Entry angle 10-23 10-23 10-20
Mud flow rate (max) 160L/min 250L/min 320L/min
Mud pressure (max) 100bar 80bar 80bar
Overall weight 6100kg 12500kg 10500kg
Dimension (LxWxH) 5700x1820x2400mm 7100x2260x2450mm 7100x2300x2500mm
Rotary Drilling Rig
Rotary drilling rig is a construction equipment machine suitable for drilling jobs in construction applications. It is widely used in municipal constructions, highways, bridges, tall buildings, etc. Equipped with different drilling tools, it is suitable for dry type drilling, wet type drilling and terrane drilling jobs. Rotary drilling rig has distinct superiorities in constructional drilling application. It is of high applicability, high automation, high drilling efficiency and effect, and does less harm to the environment. Therefore, a rotary drilling rig can effectively improve the working efficiency and save labor, materials, and costs.
منتجات
> صناعة > معدات بناء
للاستفسار
أو مراسلة lilianfql
: لا نعرف أي شيء عن هذا المعلن سوى أن بريده الإلكتروني
صحيح . 
