didimansy
www.sptechs.com  

ماكينة طباعة لاكياس البلاستيكFlexographic printing press Faustel N6 6 ColoresPrint on plastic and paper


ماكينة طباعة لاكياس البلاستيكFlexographic printing press Faustel N6 6 ColoresPrint on plastic and paper
تاريخ الإضافة
16/02/2007 10:03:36
تفاصيل
للبيع ماكينة طباعة على البلاستيك و الورق Flexographic printing press ( Faustel N6 ....6 Colores)Print on plastic and paper و فيمايلى المواصفاتpls. feel free to contact me : didimansy (at) hotmail.com
Faustel N6-6 Central Impression Flexographic Printer Press
The machine:
Faustel N6-6:
central impression roll to roll flexographic press
Six (6) colors
Maximum print width:
50 inches.
Maximum web width: 54 inches
Repeat range: 12 inch minimum to 42 inch maximum
Plate cylinder face: 52 inches
Impression cylinder diameter: 52.110 inches
Impression cylinder face: 55 ½ inches
Two roll ink metering system
Unwind roll OD maximum 38 inches
Unwind roll side to be printed- outside or inside
Rewind roll OD maximum 24 inches
Rewind roll print side- outside
Geared speed:
1,000 F.P.M. max mechanical
750 F.P.M. max print speed
Dual burner capacity 1,500,000 BTU; 0 make up air.
Drying – after deck and overhead tunnel
Dryer:
Dual dryer, including 2 burners, 2 automatic temperature control systems, but one exhaust.
Maximum temperature in tunnel 350
°
F
Maximum temperature between colors 250° F
Duct sizes (split system):
Input: 15 inches X 28 inches
Exhaust: 20 inch diameter round
Drying tunnel length: 18 feet
Total length line: 28 feet, 6 inches
Height: 13-16 inches; 16 inches including towers
Chrome anilox rolls
Photopolymer or rubber plates
Powder application unit
Year 1968
Cylinders:
180 printing cylinders included
Electrical Specifications:
Main power: 600 V stepped down to 480; 3 phase; 60HZ; 100 Amps; 75 horse power
Motors under 1/2 horse power could be 110 volt if step-down transformer is used
The ink pump motors are 208 volt, 3 phase, 60 cycle with step-down transformer
Wattage: 24 KW
Material:
This machine prints on plastic film, coated film laminated and uncoated papers
Prints on polyethylene ¾
mil and up single ply-medium and low density
Prints on Mylar ½ mil- coated and uncoated
Prints on Cellophane- all grades
·
Prints on Polyprophylene ½
mil and up coated and uncoated
·
Prints on Reynolon
½ mil
·
Prints on Vitafilm 1 mil
تفاصيل البيع و الشراء
الشحن من كندا



ماكينة طباعة لاكياس البلاستيكFlexographic printing press Faustel N6 6 ColoresPrint on plastic and paper